About BHL team

This author has not yet filled in any details.
So far BHL team has created 3 blog entries.

About paper-based microfluidics

About paper-based microfluidics Paper-based microfluidics was first introduced by Martinez and Al. [1] from the Whitesides group in 2007. The idea was to design microfluidic devices with a simpler and less expensive method, the resulting device being portable, easy to use and to [...]

By | June 24th, 2019|Uncategorized|0 Comments

Fabrication method 2/2 – wax printing

Fabrication method 2/2 - wax printing The most widely used technique to design paper microfluidic devices consists in using wax to hydrophobize paper. Fabrication method: It is possible to define hydrophobic barriers in paper by selectively depositing wax using a printing device. The latter melts the [...]

By | April 10th, 2019|Paper-based microfluidics|0 Comments

Fabrication method 1/2-paper cutting

Fabrication method 1/2 - paper cutting The first and most intuitive fabrication method for paper microfluidics designing relies on cutting the paper to obtain the desired shapes and channels.          Fabrication method: The objective of this method is to define channels within a [...]

By | April 10th, 2019|Paper-based microfluidics|0 Comments